3
Press button 1 to exit panic mode and rearm
the system. Press button 2 to exit panic mode
and disarm the system. The Panic Feature will
operate when the ignition is on.
*
Optional feature
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by using
the emergency override feature.
To override the system:
1. Enter the vehicle.
• Because the system is armed, the siren
will sound.
2. Turn on the ignition key.
3. Press the Valet switch for 3 seconds.
• The siren will stop sounding.
• Starter defeat bypassed.
OPTIONAL SECURE OVERRIDE CODE
For a higher level of security, the system may be
programmed to override only when a personal
code is entered through the valet switch.
To disarm the system using a personal override
code please follow steps 1 and 2 above, then
see step 3 below:
3. Press the override switch the number of
times equal to the disarm code and hold
for 10 seconds on the last press.
SETTING A SECURE OVERRIDE CODE
NOTE: Setting a Secure Override Code
requires entering the programming mode so
follow the directions carefully.
To set a Secure Override Code:
1. Turn the ignition key on.
2. Within 5 seconds, press valet switch 5
times.
• The siren will chirp 3 times, indicating
that you have entered Programming.
3. Press the valet switch 3 times.
• The siren will chirp each time the valet
switch is pressed.
4. Within 5 seconds, press transmitter
button 3.
• The siren will chirp 3 times indicating it
is ready for the new override code.
5. Press the valet switch the number of times
equal to the desired code (from 1-15).
6. Turn off the ignition then arm the system.
7. Disarm the system using the Secure
Override Code to permanently store the
new code.
VALET MODE
When the system is placed into the Valet Mode
the security system will be disabled. However,
the optional keyless entry and trunk release
features will still function if installed.
To enter the Valet Mode:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet/service mode
switch for 3 seconds.
• The siren will chirp once.
• The LED will turn on solid indicating
the system is in Valet Mode.
To exit Valet Mode:
1. Turn the ignition key on.
2. Press and hold the valet/service mode
switch for 3 seconds.
• The LED will turn off.
• The Siren will chirp 2 times.
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 2 seconds to
open the trunk.
BW3650 Owners Singles.qxd 6/5/03 11:13 AM Page 3
