(optional), your system is disarmed. If you have
the (optional) illuminated entry system
installed the interior light will flash twice then
stay on for 30 seconds or until you turn the
ignition on or rearm the system.
VALET MODE:
Valet
mode will
keep your
alarm sys-
tem from
passive arming (if programmed to be passive
arming), if you need to have your vehicle ser-
viced, or run it through the car wash, etc. To
put your system in Valet Mode,disarm system,
turn the ignition key on and press and hold
your valet/override switch in for approximate-
ly 3 seconds, the LED will turn solid, and siren
will chirp once. Your vehicle’s system is in
Valet Mode. If you have the keyless entry
option, the remote will still lock and unlock
the vehicle while in Valet Mode.To exit Valet
Mode: Ignition Key on, press and hold
valet/override switch for approx. 3 seconds,
LED will turn off and siren will chirp 2 times.
EMERGENCY OVERRIDE:
If you
lose your
transmit-
ter, or it
fails to
operate the system, unlock door and enter
vehicle. The siren will sound, insert your igni-
tion key and turn the ignition to the ON posi-
tion. Then press the Valet/Override Switch,
the system will be overridden and allow you
to start the vehicle.The system will automati-
cally go into valet, so it will not passively
rearm. (See Valet operation to take system out
of Valet mode.)
REMOTE PANIC:
For your personal safety you
may activate the siren by press-
ing button# 1 on your remote
for 3 seconds.This will trigger
the system into the Panic
mode. The siren will sound and
the parking lights will flash
(optional). The panic mode will
run for 45 seconds, or until you
press button # 1 on your
remote again. This feature will not operate
when the ignition is on.
ENTRY VIOLATION MEMORY:
In the event that your system is triggered and
runs an entire cycle, when you return to dis-
arm it instead of the usual 2 chirps you will
hear 3 chirps, this is to indicate that the your
system was set off., parking lights will flash 3
times as well (optional).
CHIRP DELETE:
To turn
off ARM/
DISARM
chirps,
turn igni-
tion
switch on,
then press
and hold
button# 2
until you hear a double chirp. The
Arm/Disarm chirps will remain off until you
repeat the procedure.
2
+
ON
Press
+
Hold
+
ON
Press
3 sec.
• •
•
• •
•
3 sec.
or
+
• •
•
• •
•
ON
Hold
+
ON
Hold
or
