Black Widow 1R / 2-BUTTON SERIES Скачать руководство пользователя страница 2

2

PASSIVE ARMING

The passive arming feature allows the system to

arm automatically without user intervention.

The passive arming feature also allows the

system to automatically re-arm itself in the event

the system is disarmed and the ignition is not

turned on within 30 seconds.

The Passive Arming

feature may be enabled during installation.

To arm the system passively:

1. Turn the ignition key off.

2. Exit the vehicle and close all doors.

• The LED flashes rapidly indicating that

the system is preparing to arm. (The

system can be armed at any time by

pressing transmitter button 1.)

• If the passive arming with countdown

chirps feature is selected during

installation, the siren will chirp every 2

seconds until armed.

• The siren will chirp 30 seconds after

the last door is closed to indicate the

system is now armed.

• The doors will lock.†*

If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 1.

• The siren will chirp twice.

• The parking lights will flash twice.*

• The doors will unlock.*

• The dome light will turn on for 30

seconds.*

TAMPER ALERT 

If the alarm was triggered while away, the siren

will chirp and the parking lights will flash 3

times on disarming for tamper indication.

SILENT ARMING/DISARMING

Press transmitter button 2 to Arm or Disarm

silently for one-time operation. The system can

also be programmed for full-time silent

operation during installation.

IGNITION LOCK*

The ignition locking feature automatically locks

the doors 5 seconds after the ignition key is

turned on, and automatically unlocks when the

ignition key is turned off. To avoid locking keys

in the vehicle, the ignition locking feature will be

cancelled if a door is open when the ignition is

turned on.

This feature may be disabled during

installation.

REMOTE PANIC

In the event of an emergency (PANIC) situation,

the system’s siren can be triggered for 30

seconds to attract attention.To activate the Panic

Feature, press transmitter button 1 for 3

seconds:

• The siren will sound.

• The parking lights will flash*.

Press button 1 again to exit panic mode. The

Panic Feature will not operate when the

ignition is on.

*

Optional feature 

EMERGENCY OVERRIDE

If the transmitter becomes lost or fails to

operate, the system can be disarmed by using

the emergency override feature.
To override the system:

1. Enter the vehicle.

• Because the system is armed, the siren

will sound.

2. Turn on the ignition key.

3. Press the Valet switch for 3 seconds.

• The siren will stop sounding.
• The starter defeat will be bypassed.
• The system will enter valet mode.

BW1800 art dept.qxd  1/28/2004  1:30 PM  Page 2

Содержание 1R / 2-BUTTON SERIES

















Отзывы: