engine will start and run for 30 seconds
to confirm activation.While in Auto Cold
Start Mode LED will double flash.
Disengaging the auto cold start acti-
vation:
To turn this feature off via
the remote transmitter
press and hold simultane-
ously the program switch
and button #2 on the
remote transmitter for 5
seconds, the parking lights
will flash 10 times to con-
firm deactivation.You may
also disengage the Auto Cold Start fea-
ture by pressing the brake pedal or turn-
ing the ignition to the on position at any-
time.
Note: You may also disengage the Auto Cold
Start feature by remote starting the vehicle.
Stop-N-Go Feature:
If you
wish to
exit the
car and
remove the ignition key but
keep the car running- 1.
Press the brake pedal and
hold. 2. While pressing the
brake pedal press button #
1 on the transmitter. 3.
The LED will flash rapidly
and the parking lights will
blink 4 times then turn on
solid. 4. Release the brake pedal and turn
the ignition key to off position and
remove. You now may exit the vehicle
and lock the doors with the keyless entry
feature (optional).When re-entering the
vehicle simply turn the ignition key to the
on position (not start position), press the
break pedal and place the transmission in
desired mode.
KEYLESS ENTRY FEATURE
(Optional):
Press the UNLOCK button
on the remote transmitter,
the parking lights will flash
1 time and the doors will
lock. Press UNLOCK but-
ton on the remote trans-
mitter and the lights will
flash 2 times and the doors
will unlock.
TRUNK/HATCH POP 3rd
CHANNEL
(Optional):
Press TRUNK button for
approximately 1 seconds
and the trunk/hatch will
pop open.
3
+
Press
Press
+
Hold
OFF
& Remove
Press
• •
•
• •
•
Press
or
• •
•
• •
•
Press
• •
•
• •
•
Press
Press
or
or
Press
• •
•
• •
•
Press
or
