REMOTE AUTO START
FOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULES
BEFORE INSTALLING THIS PRODUCT PLEASE READ
THIS INSTALLATION MANUAL THOROUGHLY!!
INSTALLATION MANUAL
This remote start product is intended for
installation on vehicles equipped with automatic
transmissions and electronic fuel injection only!
DO NOT INSTALL THIS UNIT INTO A MANUAL
TRANSMISSION VEHICLE AS IT COULD RESULT IN
SERIOUS INJURY OR DEATH.
• This product must be installed by qualified
personnel according to these instructions and
observing all safety features.
• The system should be placed into the valet
mode when parked inside a garage or being left for
service.
• Always notify service personnel that the
vehicle is equipped with a Remote Starter.
• Only start the vehicle in a well ventilated area.
Do not use in a closed garage or indoors.
ITEMS INCLUDED:
• Main unit
• Remote transmitter(s)*
• Plug In LED
• Plug in program switch
• Harness kit with 2 heavy duty fuse holders
• Hood pinswitch
• Extended range receiver module*
• Owner’s manual
*S models are provided with single transmitter only.
Add-on modules do not include transmitters.
OPTIONAL ACCESSORIES:
• VAC-10 Vacuum Switch Kit
• APP-1 Universal OEM transponder bypass kit
• APV-1 GM VATS, Passlock I&II bypass kit
• PDLM-3 Power door lock relay module
Before you begin the installation:
• Verify that the vehicle is equipped with
electronic fuel injection.
• Verify that the vehicle is equipped with an
automatic transmission.
• Check to see if the vehicle is equipped with any
type of factory security system.
• Check to see if there is a pinswitch for the
hood, if not one must be installed.
• Verify that the vehicle starts and idles
properly before you start the installation.
• Verify with the customer the desired location
for the program switch and LED.
• Always use a multimeter when verifying
vehicle wiring.
Remote Start Installation Notes:
The remote start unit senses the vehicle’s
successful start using one of the following methods:
1. Current sense
2. Tachometer sense
3. Spark or coil wire sense
4. Using optional vacuum switch.
