background image

1

STANDARD FEATURES

Some of the system’s standard features include:
• 4-button remote transmitter
• Extended range receiver w/built-in LED status

indicator & valet switch

• Flashing parking lights
• Auto cold Start feature
• Stop & go feature
• Programmable engine run-time
• Hood & brake pedal safety inputs

OPTIONAL FEATURES

This system has optional features that may

require additional parts and/or labor. Please

contact your dealer for more details.
• Remote keyless entry (door lock/unlock)
• Trunk/hatch release
Note: Some features may not be appropriate

for certain vehicles.

REMOTE TRANSMITTER  BUTTONS

NOTE: Transmitter cosmetics may differ, but

button functions remain the same as described:

Button 1

locks the doors* and also activates

the Panic Mode* when held for 4 seconds.

Button 2

unlocks the doors*.

Button 3

controls the Remote Start feature.

Button 4

activates the Car Finder feature.

SYSTEM OPERATION

DOOR LOCKING 

To lock the system press transmitter button 1:

• The parking lights will flash once.
• The horn will honk once.* 
• The doors will lock.*
• The LED will begin flashing after 3

seconds.

• The Starter Defeat feature will activate.*

*

Optional Feature

COMFORT CLOSURE 

The optional Comfort Closure feature activates

the lock output as long as button 1 is held. Using

this feature will roll-up the windows and close

the sunroof on some late model vehicles.
To activate the Comfort Closure feature:

1. Press and release transmitter button 1 to

lock the doors.

2. Immediately press and hold button 1 again

until the windows and sunroof are closed.
• The LED will flash once.
• The parking lights will flash once.
• The doors will lock.*

*

Optional Feature

DOOR UNLOCKING 

To unlock the system press transmitter button 2.

• The parking lights will flash twice.
• The horn will honk twice.* 
• The doors will unlock.*
• The LED will stop flashing.
• The Starter Defeat will deactivate.*

*

Optional Feature.

Transmitter Icons

Button 1

Button 2

Button 3

Button 4

SYSTEM MANUAL

REMOTE AUTO START

Optional Keyless Entry Instructions Included

BW651 final.qxd  10/18/2005  10:58 AM  Page 1

Содержание 651













Отзывы: