To enter the Valet Mode:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet/service
mode switch for 3 seconds.
• The LED will turn on solid indicating
the system is in Valet Mode.
To exit Valet Mode:
1. Turn the ignition key on.
2. Press and hold the valet/service mode
switch for 3 seconds.
• The LED will turn off.
• The Siren will chirp 2 times.
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by
using the emergency override feature.
To override the system:
1. Enter the vehicle.
• Because the system is armed, the
siren will sound.
2. Turn on the ignition key.
3. Press the Valet/Service Mode switch.
• The siren will stop sounding.
REMOTE PANIC
In the event of an emergency (PANIC)
situation, the system’s siren can be triggered
to attract attention. To activate the Panic
Feature, press transmitter button 1 for 3
seconds:
• The siren will sound .
• The parking lights will flash.
The Panic mode will run for 45 seconds, or
until transmitter button 1 is pressed again.
The Panic Feature will not operate when the
ignition is on. Also, if the vehicle is Remote
Started, activating the Panic Feature will shut
down the Remote Start.
TRUNK RELEASE
Press button 3 for approx-
imately 2 seconds to open
the trunk.
TRUNK DISARM FEATURE
The trunk disarm feature allows the alarm to
disarm automatically whenever transmitter
button 3 is used to activate the trunk
release.This eliminates having to first disarm
the alarm before activating the trunk release.
This feature must be programmed during
installation.
CAR LOCATOR FEATURE
The Car Locator feature allows the parking
lights to stay on for 30 seconds instead of
flashing when the alarm is disarmed. This
feature must be programmed during installation
and is not recommended for vehicles with
additional aftermarket or auxiliary lighting.
3
Press