Black Stone PRO 1858, Руководство пользователя, Страница: 11 / 96

!
C AU T I O N
DO NOT USE SOAP ON
THE GRIDDLE COOKING
SURFACE. This will destroy the
griddle’s seasoning.
!
WA R N I N G
NEVER APPLY COLD
WATER ACROSS THE
WHOLE SURFACE OF A HOT
GRIDDLE AT ONCE. This
may cause warping.
STEP 01
To clean griddle after
each use, cool griddle below 300° F.
Scrape food debris with spatula or
straight metal scraper.
CLEANING THE GRIDDLE COOKING SURFACE
STEP 02
Wipe down griddle
surface with paper towel.
STEP 03
Divide griddle surface
into approximately 6" sections
(width of scraper tool). Apply a
small amount of water onto first
section with a bottle and then
scrape the water and debris toward
the grease trap. Move to the next 6"
section and repeat.
DO NOT USE MORE THAN TWO
TABLESPOONS OF WATER
AT A TIME.
1/4 cup of table salt may be used to
buff off stuck food residue.
STEP 04
Wipe again with a
paper towel and dry completely.
STEP 05
Apply thin coat of
cooking oil to maintain seasoning
and protect the griddle top.
NEED HELP? Register your Blackstone
product at
blackstoneproducts.com/
register-griddle
and contact Blackstone
Customer Service for missing parts,
assembly and operation questions:

PHONE:
435-252-3030 ext 1
EMAIL:
support@blackstoneproducts.com
ONLINE:
blackstoneproducts.com/
customer-support
Care & Maintenance
TROUBLESHOOTING
Section 01
BATTERY POWERED IGNITION
TROUBLESHOOTING
If you CAN ignite your griddle with a match
POSSIBLE CAUSES SOLUTION
01. Dead battery or no battery. Replace with new battery.
02. Battery installed incorrectly. Ensure that the battery is installed nega-
tive end first.
03. Igniter wire misaligned. Ensure that the igniter wire is posi-
tioned 1/8” to 1/4” away from the burner
tube, positioned above a burner hole.
04. Damage to the ignition system. Contact customer service for replace-
ment parts.
If you CAN NOT ignite your griddle with a match
POSSIBLE CAUSES SOLUTION
05. Burner tubes are not
receiving propane.
Please reference the Gas Flow section of
the Troubleshooting Chapter.
SYMPTOMS
01. Burner will not Light with ignition system
02. Pressing the ignition button does not result in a clicking sound
To determine the cause, please try to ignite your griddle with a match.
(Please reference the Match Lighting Instructions in the Cleaning the Burner
Assembly section of the Care & Maintenance chapter.)
Insert one AA battery (not included)
into the battery socket with the posi-
tive terminal facing out, then screw
on the Ignition Button until tight. Be
careful to not over tighten.
Troubleshooting
STEP 07
With the help of another person, place the griddle top and hood
onto the griddle body by aligning the four pins to the holes on top of the
griddle unit. Make sure the pins are fully seated in the holes.
STEP 08
Attach the handle to the hood with two (2) M6X16 screws
and two (2) mica sheets as shown. Place the grease cup at the rear of the
griddle. Connect the 20lb propane tank (not included). (Please reference the
Connection & Removal section of the Fuel | Propane – 20lb. Tank chapter.)
STEP 09
Proceed to the Griddle Seasoning Instructions section of the
Care & Maintenance chapter. Enjoy cooking outdoors on your Blackstone
28” Griddle!
| Owner’s Manual | Model 1858
09
Assembly Guide