4
5
LUBRICATION OF INFLATOR
This inflator is OIL FREE. Therefore there is NO oil used for
lubrication.
ASSEMBLY
This inflator MUST be fully assembled by you prior to use.
Failure to do so will result in the warranty being VOID.
Failure to fully assemble this inflator may also result in
personal injury.
MANOEUVRING
When moving this inflator always use the handle to lift
slightly and pull/push using the attached wheels. If you
must lift this inflator always use a 2 person lift due to its
weight and size. Failure to use 2 person lift may result in
personal injury.
SAFETY
Before attempting to operate this inflator the following basic
safety precautions should be taken to reduce the risk of
fire, electric shock and personal injury. It is important to
read the instruction manual and to understand applications,
limitations and potential hazards associated with the
inflator. This inflator is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their
safety.
BEWARE OF CHILDREN
AND PETS
Children and pets should be kept out of the work area.
Children should not be allowed to touch or operate the
inflator, tools or extension cords. This inflator is not
designed for use by young children or infirm persons without
supervision. The inflator and tools should be kept out of
reach of children, preferably stored or locked in a secure
cabinet or room when not in use.
WORK AREA
Work areas and benches should be kept tidy. Cluttered
benches and work areas can cause accidents. Floors should
be kept clean and free from rubbish. Special care should
be taken when the floor is slippery due to sawdust or wax.
Always leave sufficient distance, at least 5 metres between
the inflator and the work area, especially when using tools
designed for sanding or spraying liquids.
WORK ENVIRONMENT
Do not expose your inflator to rain or use in damp or wet
conditions. Keep the work area well lit.
GUARD AGAINST ELECTRIC SHOCK
Avoid body contact with earthed or grounded surfaces (e.g.
pipes and refrigerators).
DO NOT OVERLOAD INFLATORS
The inflator will do a better, safer job and give you much
better service if it’s used at the duty cycle for which it was
designed. The duty cycle will only take effect after the initial
(1st) tank fill for the day. This inflators duty cycle is 50%.
Duty cycle is the proportion of time during which the inflator
is operating compared with not operating. For example a
50% duty cycle could mean after 30 seconds of operation,
motor pumping, the inflator must be left for 30 seconds
resting, motor not pumping. When the motor is pumping
the attached air tool can not be used. Only use the attached
air tool while the inflator is not pumping. Stop using the
attached tool as soon as the inflator starts pumping.
USE THE RIGHT TOOL
Select the right tool for the job. Do not use a tool for a job
for which it was not designed. Do not force a small inflator
to do the job of a heavy–duty inflator. Do not use the inflator
for purposes not intended.
