Black Max BM80930, Руководство оператора

Страница: 20 / 44

Page 16 — English
MAINTENANCE
PERIODIC MAINTENANCE SCHEDULE TABLE
NOTE: If a separate engine manual is provided for this pressure washer, please follow the maintenance schedule provided
in the engine manual for all engine maintenance items instead of the maintenance information listed below.
Maintenance Items
Each
Use
Every
8 hrs. Every 20
hrs.
Every
50 hrs.
Every
100 hrs.
Every
150 hrs.
Every
300 hrs.
Clean engine & check bolts & nuts X X
Check engine lubricant X
Change engine lubricant
1
X
Check water inlet filter placement
2
X
Add fuel stabilizer X
Add pump protector X
Clean spark plug X
Clean air cleaner X X
Replace air cleaner element X
Clean & adjust spark plug & electrodes X
Replace spark plug X
Remove carbon from cylinder head
3
X
Check & adjust valve clearance
3
X
Replace high pressure pump seals
3
X
Check pump lubricant level X
Check pump lubricant quality (for
discoloration or contamination)
X
Check for pump lubricant leaks -
inspect oil seals, drain plug, oil plug,
sight glass
X
1
Initial lubricant change should be performed after the first 20 hours of operation. Do not pour old lubricant down
sewage drains, into garden soil, or into open streams. Your local zoning or environmental regulations will give you
more detailed instruction on proper disposal.
2
If water inlet filter is missing or damaged, it must be replaced. See Replacement Parts List available online or call cus-
tomer service for part number to order.
3 Have performed by a qualified service center

Extend the starter grip and rope to check its condition.
If the rope is frayed, have it replaced immediately by a
qualified service center.

Remove all hoses. Coil the hoses and store as shown.
Do not allow the hose to become kinked.

Store the unit and accessories in an area that does not
reach freezing temperatures. Do not store near furnace or
other sources of heat that could dry out the pump seals.
PREPARING FOR USE AFTER STORAGE

Pull the starter grip and rope three or four times to clean
lubricant from the combustion chamber.

Remove spark plug from the cylinder. Wipe lubricant from
the spark plug and return it to the cylinder.

Reconnect the spark plug wire.

Refuel the machine as described earlier in the operator’s
manual.