Black Max BM80523 Скачать руководство пользователя страница 15

Page 11  — English

SELECTING THE RIGHT NOZZLE FOR THE JOB

See Figure 15.

Each of the nozzles has a different spray pattern. Before 
starting any cleaning job, determine the best nozzle for the 
job. Refer to the 

Nozzle Selection Guide

 for more informa-

tion about which nozzle to choose.

 WARNING:

NEVER remove nozzles without first turning off the en-
gine, relieving the water pressure in the trigger handle, 
and locking the lock out on the trigger handle. NEVER 
point the nozzle at your face or at others. The quick-
connect feature contains small springs that could eject 
the nozzle with some force. Failure to follow these in-
structions could result in an eye injury or other serious 
personal injury.

To connect a nozzle to the spray wand:

  Turn off the pressure washer and shut off the water sup-

ply. 

Pull trigger to release water pressure.

  Engage the lock out on the trigger handle by pushing up 

on the lock out until it clicks into the slot.

  Pull back the quick-connect collar.

USING THE TRIGGER HANDLE

See Figure 14.

 WARNING:

Hold the trigger handle securely with both hands. Expect 
the trigger handle to move when the trigger is pulled due 
to reaction forces. Failure to do so could cause loss of 
control and injury to yourself and others.

  Pull back and hold the trigger to operate the pressure 

washer.

  Release the trigger to stop the flow of water through the 

nozzle.

To engage the lock out:

  Push up on the lock out until it clicks into the slot.

To disengage the lock out:

  Push the lock out down and into its original position.

Start with the nozzle 1–2 ft. away from the cleaning surface 
and carefully approach the surface just until the desired 
level of cleaning is achieved. If the spray is too close it can 
damage the cleaning surface.

OPERATION

ABRASIVE

GENTLE

NOZZLE SELECTION GUIDE

HIGH   PRESSURE

(NO SOAP WHEN USING THESE NOZZLES)

LOW   PRESSURE

(FOR SOAP OR 

GENTLE RINSE)

25º Green

40º White

Blue or Black Soap Nozzle

Concrete, Brick, Masonry

Siding, Gutters, House

Fencing, Deck, Patio

Lawn Equipment, Boat, RV

          Recommended nozzle          

        Use with caution for certain applications

Содержание BM80523









































Отзывы: