13
______________________________
Troubleshooting
If you experience any of the following difficulties while using the player, use this
troubleshooting guide to help you remedy the problem. Should any of these problems persist,
consult your nearest Black Ice Audio Dealer.
There is no sound.
>Check that the player is connected to the amplifier.
>Check that the power switch is on.
>Check to see if the unit is plugged into an outlet.
>Check the fuse located in the IEC or the place where the AC Cord is attached to the unit. Pry
the cover off carefully (slides out like a tray) to expose the fuse and check to see if it is intact.
If not, replace with the spare fuse.
The CD does not play.
>There is no CD inside the player. Insert a CD.
>Place the CD with the label side up on the disc tray correctly.
>Clean the CD.
>Moisture has condensed inside the player. Remove the disc and leave the player turned on
for about an hour.
The remote does not function.
>Remove the obstacles in the path of the remote and the player.
>Point the remote at the remote sensor on the player.
>Replace all the batteries in the remote with new ones if they are weak.
The Display is reading “No Disc” or is reading “-----“when a disc is in the unit.
>Turn the unit off, allow it to sit for three seconds and turn the unit on. Since the unit is all
metal, it is susceptible to static electricity. Turning the unit off and back on, resets the
controller.
The Display has red box reading OVR.
> There is nothing wrong with the unit. The CD player tracks up to 15 music cuts on a
CD disc. The player is only alerting that the disc playing has over (OVR) 15 cuts.