DECATHLON-
Item code:BH26.
INSTRUCTION MANUAL
23
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Rudder pushrod.
Bend and cut after
Rudder pushrod.
Elevator pushrod.
Elevator
pushrod.
Rudder
pushrod.
Elevator
pushrod.
Throttle pushrod
Secure
INSTALLING THE THROTTLE PUSHROD.
Servo arm.
Connector.
Rudder cotrol horn
