ARMOUR REAR BUMPER
2014-18 TOYOTA TUNDRA
Page 5 of 6
WARNING!
Do not crawl under bumper
unless the bumper is properly supported on
blocks or stands or the bumper may fall.
Rear
(Fig 12A) Attach Bumper Assembly to Mounting
Brackets
Models without
Receiver Hitch:
(4) 14mm Hex Bolts
(8) 14mm Flat Washers
(4) 14mm Lock Washers
(4) 14mm Hex Nuts
(Fig 11) Attach the Mounting Bracket
to the frame and Support Bracket
(Fig 9) Models without receiver hitch
attach Support Bracket to frame
(Fig 10) Attach Support Bracket to inside of frame
or receiver hitch. (Pictured with Hitch Receiver)
Factory Hardware or
(2) 14mm Hex Bolts
(4) 14mm Flat Washers
(2) 14mm Lock Washers
(2) 14mm Hex Nuts
Frame
(2) 12mm x 45mm Hex Bolts
(2) 12mm Flat Washers
(2) 12mm Lock Washers
