BLACK MODULAR GRILLE GUARD FOR TOYOTA SEQUOIA 01-07/ TUNDRA 00-06
Page 4 of 4
INSTALLING THE FRAME BRACKETS
1
) REMOVE FACTORY TOW HOOKS (BUT DO NOT DISCARD THE FACTORY BOLTS) THE BOLT PATTERN
ON THE FAAME MOUNTING BRACKETS WILL BE POSITIONED IN MANNER SHOWN IN ILLUSTRATION
(PASSENGER SHOWN) ATTACH FRAME BRACKETS USING THE FACTORY BOLTS.
INSTALLING THE FRONT BAR
2) LINE UP THE THREE HOLES ON THE LOWER PORTON OF FRONT BAR WITH THE THREE HOLES ON THE
FRAME BRACKETS(OUTER EDGE)USING THE M12
х30
HEX BOLT ,M12 HEX NUT AND 12mm FLAT WASHERS
TO FASHEN THE FRONT BAR TO THE FRAME BRACKETS.
3) REMOVE THE REVETS LOCATED UNDERNEATH THE VEHICLE IN ORDER TO INSTALL THE L-SUPPORT
BRACKETS,ATTACH L-SUPPORT BRACKETS USING THE M6X25 SCREWS,M6 HEX NYLOK NUTS ,6mm FLAT
WASHER AND M12
х30
HEX BOLTS, 12mm FLAT WASHERS AND M12 HEX NUT.
4)
ONCE THE FRONT BAR IS ATTACHING TO ALL MOUNTING BRACKETS ALIGN THE LEFT AND RIGTH
SIDE OF THE FRONT BAR TO THE BUMPER AND TIGHTEN ALL FASTENERS.
Any damages and losses caused by improper installation and application, goes beyond our
quality warranty.
NOTE
