15
SUPER AIR- Item code
BH05-A.
Instruction Manual
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
ELEVATOR INSTALLATION.
SERVO INSTALLATION.
elevator servo.
HORIZONTAL STABILIZER INSTALLATION.
elevator servo.
See pictures below:
Bottom side
1. Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
2. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Center line.
Temporary pin to
keep hinge centered.
Cut the covering
away from the slot.
