SPITFIRE 40.
24
Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess material
from the arm.
After installing the adjustable metal connec-
tor apply a small drop of thin C/A to the bot-
tom nut. This will prevent the connector from
loosening during flight.
INSTALLING THE THROTTLE PUSHROD.
Servo arm.
Conector.
Elevator
pushrod.
Rudder pushrod.
Elevator
pushrod.
Throttle servo.
Secure.
Switch hole
1) Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.
2) Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.
Throttle pushrod.
Cut.
