6
SEA FURY - EP
Item code: BH126
.
Instruction Manual
Repeat the procedure for the other wing
half
.
2) Using a modeling knife, remove the cov-
ering at possition show below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Servo tray.
Remove
covering
Servo tray.
Servo tray.
thread
Electric wire.
Secure
Secure.
