16
SEA FURY -
Item code:BH113
INSTRUCTION MANUAL.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flow
through easily.
9) To secure the fuel tank in place, apply a
bead of silicon sealer to the forward area of
the tank, where it exits the fuselage behind the
engine mounting box and to the rear of the tank
at the forward bulkhead.
Do not secure the tank into place perma-
nently until after balancing the airplane. You
may need to remove the tank to mount the
battery in the fuel tank compartment
Tie wrap.
Secure
Fuel Tank
7) Using a modeling knife, cut 3 lengths of
fuel line 150mm long. Connect 2 lines to the 2
vent tubes and 1 line to the fuel pickup tube in
the stopper.
8) Feed three lines through the fuel tank
compartment and through the pre-drilled hole
in the firewall. Pull the lines out from behind
the engine, while guiding the fuel tank into
place. Push the fuel tank as far forward as
possible, the front of the tank should just about
touch the back of the firewall.
Содержание Sea Fury BH113
Страница 10: ...10 SEA FURY Item code BH113 INSTRUCTION MANUAL M3 Lock nut 3 x 16 mm Secure Secure 5 x 35mm...
Страница 12: ...12 SEA FURY Item code BH113 INSTRUCTION MANUAL Connector Connector Secure...
Страница 20: ...20 SEA FURY Item code BH113 INSTRUCTION MANUAL 277 mm 9 mm Epoxy glue Epoxy glue C A glue...