
9
ROCKWELL AERO COMMANDER SHRIKE
-Item code:
BH90
INSTRUCTION MANUAL.
INSTALLING THE STOPPER ASSEMBLY
1) The stopper has been pre-assembled
at the factory.
2) Using a modeling knife, cut one length
of silicon fuel line (the length of silicon fuel line
is calculated by how the weighted clunk should
rest about 8mm away from the rear of the tank
and move freely inside the tank). Connect one
FUEL TANK.
end of the line to the weighted clunk and the
other end to the nylon pick up tube in the stop-
per.
Drill a hole
2mm diameter.
See pictures below:
INSTALLING THE ENGINE MOUNT.
Repeat the procedure for the other wing
half
.
4 x 30mm
3 x 20mm
Содержание ROCKWELL AERO COMMANDER SHRIKE
Страница 8: ...8 ROCKWELL AERO COMMANDER SHRIKE Item code BH90 INSTRUCTION MANUAL 3x15mm Secure Secure 75mm Secure ...
Страница 22: ...22 ROCKWELL AERO COMMANDER SHRIKE Item code BH90 INSTRUCTION MANUAL Epoxy glue C A glue C A glue Secure ...
Страница 24: ...24 ROCKWELL AERO COMMANDER SHRIKE Item code BH90 INSTRUCTION MANUAL 3 x 15mm Secure Secure Secure ...
Страница 26: ...26 ROCKWELL AERO COMMANDER SHRIKE Item code BH90 INSTRUCTION MANUAL VALVE CONTROL AIR TANK ...