120 - 2 stroke
PARTS LISTING (NOT INCLUDED).
Wire cutters.
Hex Wrench.
Threadlocker
(screw cement).
Hand or
electric drill.
cm
1
2
3
4
5
6
7
8
9
10
Straight edge ruler.
Some more tools.
Assorted drill bits.
Masking tape.
Paper towels.
Rubbing alcohol
90° square or builder's triangle.
Screw driver
Medium C/A glue
EPOXY A
EPOXY B
30 minute epoxy.
5 minute epoxy.
Modeling knife.
2 bender plier
TOOLS & SUPPLIES NEEDED.
BATTER
Y
Suit with your engine.
ESC
MOTOR
§
This model is not a toy and pilots must be over the
age of 14.
§
Be sure that no other flyers are using your radio
frequency.
§
Do not smoke near fuel.
§
Store fuel in a cool, dry place, away from children
and pets.
§
Wear safety glasses.
§
The glow plug clip must be securely attached to
the glow plug.
SAFETY PRECAUTION:
§
Do not flip the propeller with your fingers.
§
Keep loose clothing and wires away from the
propeller.
§
Do not start the engine if people are near. Do not
stand in line with the side of the propeller.
§
Make engine adjustments from behind the
propeller only. Do not reach around the spinning
propeller.
§
Moisture causes damage to electronics. Avoid
water exposure to all equipment not specifically
designed and protected for this purpose.
4
Instruction manual
PIPER J-3 CUB Item code: BH58A
