Black Horse Model P.C-9 BH76, Инструкция по эксплуатации

Страница: 24 / 38

24
P.C-9
- Item code: BH76.
Instruction Manual.
C/A glue
C/A glue


2. Mark the shape of the vertical on the left
and right side of the rudder on to the horizon-
tal stabilizer using a felt-tip pen.

1. Put the rudder into the fuselage as same
as picture below.


4. Now, remove the rudder and using a
modeling knife, carefully cut just inside the
marked lines and remove the film of the rud-
der. Just as you did with the horizontal stabi-
lizer, make sure you only press hard enough
to cut the film, not the balsa rudder.


Also carefully remove the covering from
below the lines as you drew as same picture
below.


3. Put the vertical stabilizer back in
place. Using a triangle, check to ensure
that the vertical stabilizer is aligned 90 de-
gree to the horizontal stabilizer.
Mark point
Remove covering