Black Horse Model OV-1 MOHAWK, Инструкция по эксплуатации

Страница: 20 / 28

OV - 1 MOHAWK.
INSTRUCTION MANUAL.
20
ELEVATOR CONTROL HORN
INSTALLATION.

Installing elevator control horn as same as
picture below.
C/A glue.

5) When you are sure that everything is
aligned correctly, mix up a generous amount
of 30 minute epoxy. Apply a thin layer to the
top and bottom of the stabilizer mounting area
and to the stabilizer mounting platform sides
in the fuselage. Slide the stabilizer in place and
re-align. Double check all of your measure-
ments one more time before the epoxy cures.
Remove any excess epoxy using a paper
towel and rubbing alcohol and hold the stabi-
lizer in place with T-pins or masking tape.
C/A glue.
Epoxy glue.
C/A glue.
C/A glue.
Remove
covering.
Elevator
slot