Black Horse Model GIL MORE, Инструкция по эксплуатации, Страница: 24 / 29

24
GILMORE-
Item code:BH62.
INSTRUCTION MANUAL
Rudder servo
  
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
MOUNTING THE TAIL WHEEL
BRACKET.
  
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
  
3. Secure the tail wheel bracket in place
using three 3mm x 15mm wood screws. Be
careful not to overtighten the screws.
3mm x 15mm
Mark point