Black Horse Model Corsair BH64 Скачать руководство пользователя страница 1

Instruction Manual Book

F4U CORSAIR

Item code: BH64 

95% ALMOST READY TO FLY

Made in Vietnam.

Glow and EP

 

New improvement

SPECIFICATION:

-  Wingspan: 2,280 mm (89.76 in).
-  Length: 1,800 mm (70.87 in).
-  Weight: 9.6 - 10kg  (21.1 - 22lbs).
-  Wing area: 94.6dm2.
-  Wing loading:  101.5g/dm2.
-  Servo mount: 42mm x 21mm.
-  Spinner size: Corsair style (not included).
-  Wing type: Naca Airfoils.
-  Main gear type: Rotary 90 degree Air retract 
gear and CNC suspension metal struts (included).
-  Tail gear type: Air retract gear with 
CNC suspension metal struts (included).

Parts listing required (not included):

-  Radio: 6 channels.
-  Servo: 09 size (39.9 x 20.1 x 38.1)mm. 
Standard high torque servos.
-  Engine : 55 - 65 cc gas.
-  Motor: Brushless outrunner 5000 -  6500W, 230KV.
-  Propeller: Suit with your engine.

Recommended receiver battery (not included):  

-  Motor:  RIMFIRE. 50 cc.
-  Lipo cell: 12 cells 5500 - 6000mAh.
-  Receiver battery: 6.0V 2400-2600mAh(2 Packs).
-  ESC: 120A.

ALL BALSA - PLY WOOD CONSTRUCTION.
COVERED IN A HEAT-SHRINK FILM WITH PRINTED.
INCLUDING AIR RETRACT. 
AIR UP, AIR DOWN, TURN AND TWIST OLEO STRUTS LANDING GEAR.

Содержание Corsair BH64

















































Отзывы: