Black Horse Model BH73, Инструкция по эксплуатации

Страница: 31 / 36

RYAN 61 -
Item code: BH73.
INSTRUCTION MANUAL
31
Bend and cut after
Cut
C/A glue
1. Cut out the switch hole using a
modeling knife. Use a 2mm drill bit and drill
out the two mounting holes through the fuse-
lage side.
2. Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.
2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
INSTALLING THE RECEIVER AND BATTERY.
1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.
switch