P47-THUNDERBOLT
.
Item code: BH36-A.
Instruction Manual
8
Locate the long piece of wire used for the throttle
pushrod. One end of the wire has been pre-bend in to a
“Z” bend at the factory. This “Z” bend should be inserted
into the throttle arm of the engine when the engine is
fitted onto the engine mount. Fit the engine to the engine
mount using the screws provided.
OPTION 1: ELECTRIC MOTOR
OPTION 2: ENGINE MOUNT
1. INSTALLING THE STOPPER ASSEMBLY
1)
The stopper has been pre-assembled at the
factory.
2)
Using a modeling knife, cut one length of silicon
fuel line (the length of silicon fuel line is calculated by
how the weighted clunk should rest about 8mm away
V. FUEL TANK,
SERVOS INSTALLATION
4x70mm
4x20mm
125mm
4x30mm
