Black Horse Model BH172 Скачать руководство пользователя страница 3

Страница: 3 / 41

To avoid scratching your new airplane, do not

unwrap the pieces until they are needed for assembly.
Cover your workbench with an old towel or brown paper,
both to protect the aircraft and to protect the table. Keep
a couple of jars or bowls handy to hold the small parts
after you open the bag.

SUGGESTION

Please trial fit all the parts. Make sure you have the

correct parts and that they fit and are aligned properly
before gluing! This will assure proper assembly.

hand made from natural materials, every plane is unique
and minor adjustments may have to be made. However,
you should find the fit superior and assembly simple.

The painted and plastic parts used in this kit are fuel

proof. However, they are not tolerant of many harsh
chemicals including the following: paint thinner, C/A glue
accelerator, C/A glue debonder and acetone. Do not let
these chemicals come in contact with the colors on the
covering and the plastic parts.

Caution:

This model is not a toy!

If you are a beginner to this type of powered model,

please ask an experienced model flyer for help and
support. If you attempt to operate the model without

This kit

NOTE:

Black Horse Model guarantees the component

parts in this kit to be free from defects in both material
and workmanship at the date of purchase by the
purchaser.

This warranty does not cover cosmetic damage or

damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or modification of or to any
part of the Product.

This warranty does not cover damage due to

improper installation, operation, maintenance, or
attempted repair by anyone other than Black Horse
Model.

Return only the component part that is defective in

materials or workmanship. Please pack the unit carefully
and insure it, as this warranty does not cover loss or
damage in transit.

WARRANTY

DISCLAIMER

Read this disclaimer carefully before using this

product. Please strictly follow the instruction manual to
assemble and use this.

In that Black Horse Model has no control over the

final assembly or material used for final assembly, black
Horse Model is not responsible for loss of use, or other
incidental or consequential damages.

Furthermore, Black Horse Model cannot be held

liable for personal injury or property damage caused by
the use or misuse of Black Horse Model products. By the
act of using the user-assembled products, the user
accepts all resulting liability.

knowing what you are doing you could easily injure
yourself or somebody else. Please keep your safety and
well-being in mind at all times.

Important:

Before you start construction

Even if you have built a large number of RC

modelsplease read right through these instructions and
check all the kit components against the parts list. We
have taken great trouble to keep construction as simple
as possible, without making any compromises in the area
of safety.

Note regarding the film covering

Minor creases or bubbles may develop in the film

covering due to major fluctuations in weather conditions
(temperature, humidity etc.); in rare cases you may even
find a slight warp in a component. These minor faults are
in the nature of film-covered built-up wooden structures,
and can easily be corrected using a heat gun, as
commonly used for modelling.

Creases:

Blow warm air over the area and rub down

with a soft cloth.

Wing wrap:

Hold the panel twisted gently in the

opposite direction to the wrap, and apply warm air to
remove the creases from the covering.

Caution!

do not heat the film more than is absolutely

necessary. If the air or the iron is too hot, the film may melt
and holes may be formed.

This model is highly pre-fabricated and can be built

in a very short time. However, the work which you have to
carry out is important and must be done carefully. The
model will only be strong and fly well if you complete your
tasks competently - so please work slowly and
accurately.

When self-tapping screws have to be screwed

into wood, apply a little white glue to prevent them
shaking loose: just squirt white glue into the hole
and fit the screw

This model is not a toy and pilots must be over the

age of 14.

Be sure that no other flyers are using your radio

frequency.

Do not smoke near fuel.

Store fuel in a cool, dry place, away from children

and pets.

Wear safety glasses.

The glow plug clip must be securely attached to the

glow plug.