23
HAWKER TYPHOON MK1B
- Item code: BH132
.
Instruction Manual
1. Rudder push - pull system install as
same as picture below.
RUDDER CABLE INSTALLATION.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
Secure.
Rudder cable.
Bottom side.
Bottom side.
3 x 15mm
MOUNTING THE TAIL WHEEL
BRACKET.
3x15mm
3x10mm
Cut off the
excess cable.
