15
SPEED AIR-40 _
Item code:BH08.
Instruction Manual.
HORIZONTAL STABILIZER INSTALLATION.
See pictures below:
Temporary pin to
keep hinge centered.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Cut the covering
away from the slot.
Top side
Bottom side
Bottom side
2) Using a ruler and a pen, locate the
centerline of the horizontal stabilizer, at the trail-
ing edge, and place a mark. Use a traingle and
extend this mark, from back to front, across
the top of the stabilizer. Also extend this mark
down the back of the trailing edge of the stabi-
lizer. Then slide the horizontal stabilizerthe into
the fuselage.
Center line.
The top of the stabilizer does not have
the hinge pins exposed.
1. Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
Remove
covering.
All manuals and user guides at all-guides.com
