30
GRUNAU BABY 2B -
Item code: BH
115.
Instruction Manual
CONTROL THROWS.
1) We highly recommend setting up a
plane using the control throws listed.
2) The control throws should be meas-
ured at the widest point of each control sur-
face.
3) Check to be sure the control surfaces
move in the correct directions.
Ailerons : 15mm up 15mm down
Elevator : 20mm up 20mm down
Rudder : 40mm right 40mm left
PRE-FLIGHT CHECK.
1) Completely charge your transmitter and
receiver batteries before your first day of fly-
ing.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the
airplane.
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your GRUNAU BABY 2B.
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
Aileron control
40
40