Black Diamond Video XPS PRO1000, Руководство пользователя

Страница: 49 / 54

. . . . .
R S - 2 3 2 A N D 1 0 / 1 0 0 T P R O T O C O L
XPS PRO1000 Command Set
XPS PRO 1000 User Guide Edition 1.02
45
INPUTTESTPATTERN INTP <host> <pattern>
Turns on the test pattern
<pattern>
with host
<host>
from the input RGB converter. The
converter generates an RGB host signal internally.
To turn the test pattern generator off, issue the
command
intp F <host> . Although it is
required, the
<host>
setting is ignored.
Test patterns
<pattern>
:
0 color bars
1 grey ramp
2 red ramp
3 green ramp
4 blue ramp
5 grey 64 steps
6 red 64 steps
7 green 64 steps
8 blue 64 steps
9 Auto
Calibration
F Turns the test pattern generator off
Output modes
<host>
:
0 800x600
1 1024x768
2 1280x1024
3 1600x1200
4 1920x1080
5 1920x1200
IPADDRESS IPADDR <ip address>
Sets the static IP address for network use.
IPGATEWAY IPGW <ip gateway> Sets the network gateway.
IPNETMASK IPNM <net mask>
Sets the network mask.
NEWEDID NEDID <INPUT #> <hfp> <hs>
<hbp> <hact> <vfp> <vs>
<vbp> <vact> <hfreq> <sync>
<phase> <vpol> <hpol>
<interlace> Creates a special EDID timing for the designated
input, with the specified parameters.
<hfreq>
in Hz.
<sync>
is 3,4, or 5 wire.
<vpol>
is vertical sync polarity; 1 = positive, 0 =
negative.
<hpol>
is horizontal sync polarity.
<interlace>
is 1 = interlaced, 0 = non-
interlaced.
PROGEDID PROGEDID <input #>
Programs the default dual link or single link EDID
value to the selected input channel. NOTE: Before
issuing this command, disconnect the input from
the source.
RESET RESET
Initiates a system reset of the XPS PRO1000.
RESETNETPASSWORD RSTNPW
Resets the network password to default.
Default =
blackdiamond
IMPORTANT : This command requires assistance
from Black Diamond Video technical support.
SYSTEM COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .