6
Display Screens –
continued
Timer Screens (T1–7)
The Hydrobox 2 System has a total of 7 timers. Each timer
can be set in one of four ways:
1. As an
Operational Window Timer
(The system can only operate during a set period of time.
The unit is forced to complete an initial heating cycle, If the unit
is running at the off time it will complete the cycle and shut off.)
Example shows an operation window timer set to
allow the unit to come on from 7am and shut off at
5pm everyday.
2. As a
Non-Operational Window Timer
(The unit is restricted in operation and cannot run during time
specified. If a heating cycle is running at off time, the system
will force stop the operation.)
Example shows an non-operation window timer set to
prevent the unit from operating between 5pm and 7am
daily.
3. As a
Force heat
(The system turns on at a set time and will force the unit to
run at a set time regardless of restart sensor temperature.)
Example shows a Force Heat timer set to 3pm everyday.
4. As a
Force Stop
(The system turns off at a set time and forces the unit to
stop regardless of restart sensor temperature and disallows
operation until a “Force Heat” timer occurs or user presses
power button.)
Example shows Force Stop set to 5pm everyday.
Each individual timer can be set to repeat daily, on specific
days of the week, on all weekdays, or on weekends only.
Each timer can be set individually by using the following
steps:
• Scroll through to the desired timer screen.
(T1 – T7)
denote the timers available.
• Initially one of the four timer options must be selected.
To do so press <> – the
On/Off
description will begin
flashing to indicate it is ready to be changed.
• Use
Down
or
Up
to adjust. If an On/Off or On
Timer is required press
Down
or
Up
until
On
is indicated. If an Off/On or Off Timer is required press
Down
or
Up
until
Off
is indicated.
• Press
to proceed to setting the hour and adjust
Down
or
Up
to the correct hour.
• Press
to proceed to setting the minute and adjust
Down
or
Up
to the correct minute.
• Press
to proceed to setting the desired timer
occurrence and use
Down
or
Up
to select
MON-SUN
(a specific day),
DAY
(daily),
WKD
(weekend only), or
M2F
(weekdays).
• Press
to proceed to setting the timer activation.
Should the timer be required use the
Down
or
Up
buttons to adjust until
On
is indicated. To
deactivate the timer adjust until
Off
is indicated.
• Press
to proceed to setting the second time line.
Setting this time will depend on the initial timer option
chosen.
-
On/Off Timer
set the hour and minute to the time
you wish the system to turn off.
-
Off/On Timer
set the hour and minute to the time
you wish the system to turn on.
-
On Timer
set the hour and minute to match
the same time chosen previously e.g. both time
selections should match.
-
Off Timer
set the hour and minute to match
the same time chosen previously e.g. both time
selections should match.
• Press
to confirm and end the timer setting
process.
WARNING: The Force Stop timer is not
recommended
