OPERATiON
18
2. Cut ties and uncoil the green hose and use some weight to
help straighten the hose out. Best to do this on a warmer day
in the sun.
3. Separate the cam lock coupler and fitting. Align the green
hose to the coupler and mark the locations of the ribs on the
fitting.
4. Mark the second rib on the coupler on the hose.
5. Lay the green hose side by side and place the clamp marked
54-57 in their approximate location.
6. Slide the clamps back and start to assemble the green hose
to cam lock coupler.
7. Insert the cam lock coupler in the green rigid suction hose
until properly seated.
NOTicE
You may use a small amount of dish soap on the cam lock
coupler to help ease the green hose on the fitting. Work the
soap around the coupler with your finger. Then work the
green hose on the fitting, by twisting and turning until it’s fully
seated.
You may need to dip the green suction hose into boiling water
for 1 minute to install the hose as well. This will allow the
material to stretch some while assembling the green hose to
the cam lock coupler.
8. Slide the clamps marked 54-57 over cam lock coupler just
past the marks you made on the hose earlier.
