manualshive.com logo in svg

Black Diamond Equipment BD100619, Руководство оператора

Поделиться
Скачать
Black Diamond Equipment BD100619 Скачать руководство пользователя страница 28

STORAGE

28

Long Term Storage (over 1 year)

For storage over 1 year, the gasoline tank and carburetor must be 
completely drained of gasoline.

1.  The generator is to be OFF and all appliances disconnected.

2.  Turn the fuel valve to the “ON” position.

3.  Use the drain bolt on the carburetor to empty any excess 

gasoline from the gasoline tank and carburetor into an 
appropriate container. Use a funnel (and appropriate hose if 
necessary) under the carburetor drain bolt to avoid spillage.

4.  When gasoline stops flowing from the carburetor, replace 

and tighten the carburetor drain bolt and be sure to properly 
dispose of the drained gasoline according to local regulations 
or guidelines.

5.  Turn the fuel valve to the “OFF” position.

6.  Follow steps 7-11 according to 

Mid

 Term Storage.

Removing from Storage

 

NOTICE

If the generator has been improperly stored for a period 
longer than 30 days with ethanol blended gasoline in the 
gasoline tank and/or carburetor, all fuel must be drained 
and the carburetor must be thoroughly cleaned of ethanol 
build up. This process involves technically advanced tasks. 
For assistance please call our Technical Support Team at 
1-888-373-8272.

If the gasoline tank and carburetor were properly emptied of all 
ethanol blended gasoline prior to the generator being stored, 
follow the below steps when removing from storage.

1.  Be sure the ignition switch is in the “OFF” position. 

2.  Add gasoline to the generator according to 

Add Fuel.

3.  Turn the fuel valve to the “ON” position.

4.  After 5 minutes check the carburetor and air filter areas for 

any leaking gasoline. If any leaks are found, the carburetor 
will need to be disassembled and cleaned or replaced. If no 
gasoline leaks are found, turn the fuel valve to the “OFF” 
position.

5.  Check engine oil level and add clean, fresh oil if needed. See 

Oil Specifications for proper oil type.

6.  Check and clear air filter of any obstructions such as bugs or 

cobwebs. If necessary, clean air filter according to Cleaning 
the Air Filter.

7.  Start the generator according to Starting the Engine.

Содержание BD100619




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды