4
5
• Do not mix old and new; or alkaline, standard (carbon-zinc) and rechargeable (nickel
cadmium or nickel metal hydride) batteries. Replace all of them at the same time
with new batteries of the same brand and type.
• Remove dead batteries immediately and dispose of per local codes.
• Do not dispose of batteries in fire.
• Keep batteries out of reach of children.
• Remove batteries if the device will not be used for several months.
“Transporting batteries can possibly cause fires if the battery terminals inadvertently
come in contact with conductive materials such as keys, coins, hand tools and the
like. The US Department of Transportation Hazardous Material Regulations (HMR)
actually prohibit transporting batteries in commerce or on airplanes (i.e. packed in
suitcases and carryon luggage) UNLESS they are properly protected from short
circuits. So when transporting individual batteries, make sure that the battery terminals
are protected and well insulated from materials that could contact them and cause a
short circuit.”
SAVE THESE INSTRUCTIONS
INTRODUCTION
Congratulations on purchasing your new
Black & Decker 28 LED Barflex
®
360°
Area Light
.
Read this Instruction Manual and follow the instructions carefully
before using your new work light.
FEATURES
1. Magnetic base
2. Base cover
3. Base screw
4. Three (3) “AA” alkaline dry cell
batteries (may be sold separately)
5. Hanging hook
6. 28 ultra bright LEDs
7. Pivot tube
8. Light mode pushbutton (High/
Medium/Off/Flash)
5
6
7
8
1
3
2
4
POWER SUPPLY
The unit is powered by three “AA” alkaline dry cell batteries (may be sold separately).
Unscrew the base cover screw (counter-clockwise) and remove the base cover. Insert
batteries as described in compartment, observing the cautions that follow. Replace and
secure the base cover by screwing the base cover screw clockwise. Do not over-tighten.
CAUTIONS
• When replacing the “AA” alkaline dry cell batteries: Do not mix old and new, alkaline
and rechargeable (nickel cadmium or nickel metal hydride) batteries. Always insert
batteries correctly with regard to polarity (+ and –), marked on the battery and the
equipment. Remove dead batteries immediately and dispose of per local codes.
• Follow all warnings regarding batteries in the Important Safety Instructions section
of this manual.
OPERATING THE LIGHT
• Position the unit as desired. Press the light mode pushbutton on the front of the unit.
• Press once for high intensity.
BFMAKB2_ManualENSP_072715.indd 4-5
7/27/2015 4:32:30 PM
