Black+Decker VM2040, Руководство пользователя

Страница: 8 / 9

8
ENGLISH
cleaned every week, or whenever suction
performance is noticeably reduced. The
appliance is fitted with a bypass valve.
When the filter is clogged, the operation
of the valve is audible. This is normal and
does not indicate a problem.
Switch off the appliance and remove the
plug from the socket before cleaning the filters.
• Remove the container (9) from the
appliance (fig. J).
• Empty the container (fig. K).
• Remove the cartridge (28) from the
container by turning it clockwise (fig. L).
• Remove the pre-filter cover (29) from the
main filter (30).
• Shake off excess dust by tapping the filter
into a dustbin.
Warning! Do not b
rush or use compressed air
to clean the filter.
• Depending on its condition, rinse the outside
of the filter with water. Allow the filter to dry
for 24 hours before re-inserting it.
Warning! Do not wash the inside of t he filter.
• Take out the filter (31) located right below t he
grid and brush off any loose dust before
re-inserting it.
• Slide the pre-filter cover back over the main
filter.
• Place the cartridge back in the container by
turning it counterclockwise.
• Close the container.
• Re-insert the d ust container into the appliance.
Cleaning the exhaust filter (fig. N)
The exhaust filter gives a further filtration level.
The filter is re-usable and should be cleaned
regularly.
• Remove the lid (32).
• Take the exhaust filter (33) out.
• Brush any loose dust off the filter.
• Re-insert the filter.
• Close the lid.
Replacing the filters (fig. J - N)
The container filter should be replaced every
6 to 9 months and whenever worn or damaged.
When replacing the dust container filter, the
pre-filter, main motor filter and the exhaust
filters have to be replaced as well.
Replacement filters sets (all 4 filters) are
available from your Black & Decker dealer.
Replacing the pre-filter and main
container filter (fig. J - M)
• Procee d as described above to replace
the filters.
Replacing the exhaust filter (fig. N)
• P roceed as described above to replace
the filter.
Storing the appliance
Warning!
When storing the appliance, switch
the appliance off and unplug it.
• Make sure that the cord is fully rewound.
• Place the appliance in an upright position.
• Park the tube in the park position (23).
• Store the appliance in a dry location.
Maintenance
You r BLACK+DECKER corded appliance has
been designed to operate over a long period
of time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Mains plug replacement.
If a new mains plug needs to be fitted:
• Sa fely dispose of the old plug.
• Connect the brown lead to the live
terminal in the new plug.
• Connect the blue lead to the neutral
terminal.
Warning! No
connection is to be made to
the earth terminal. Follow the fitting
instructions supplied with good quality plugs.
Recommended fuse: 10 A.