Black+Decker TBSV2020GS, Оригинальное руководство пользователя

Страница: 8 / 16

8
ENGLISH (Original instructions)
8
ENGLISH (Original instructions)
12. Accessory storage clip
14. Wide mouth dust brush
Charging a Battery
BLACK+DECKER chargers are designed to charge
BLACK+DECKER battery packs.
Note: To ensure maximum performance and life of lithium
ion battery packs:
Recharge discharged batteries as soon as possible
after every use.
Do not discharge batteries fully.
Charging (Fig. A)
Plug the charger (5) into an appropriate outlet before
inserting the battery pack (4).
Insert the battery pack into the desk charger (5).
When using the the desk charger a green LED (5b) will
The completion of charge is indicated by the green LED
(5b) remaining on continuously. The pack is fully charged
and may be used at this time or left on the charger.
Note: The battery includes a state of charge indicator to quick-
ly determine the extent of battery life. By pressing the state of
charge button (4a) you can easily view the charge remaining
in the battery. (for 36V Battery)
Insert battery (4) into tool until an audible click is heard as
Ensure battery pack is fully seated and fully latched into
position.
To remove battery pack
Depress the battery release button and pull battery pack
(4) out of the tool.
Assembly (Fig. C)
Align the top of the extension tube (9) with the vacuum
Push the extension tube (9) onto the vacuum inlet (16) so
it locks into position.
head (8) so it locks into position.
To remove an accessory, press the accessory release
latch located on the accessory and pull it off.
USE
This vacuum cleaner can be used in one of four ways.
With the extension tube (9) and an accesssory tool (10),
With an accesssory tool (10), (11), (13) or (14) and the
Accessories not supplied with your unit can be ordered
through service department.
Switching ON and OFF (Fig. F)
For increased power, slide the variable power switch (2)
forward.
Note:
attached to the vacuum or extension tube (it can be switched
off by pressing the button 2a on the display). The LED
whenever the beater bar activation button (2a) is switched ON
(they can be switched off by pressing the button again).
Note: The state of charge indicator LEDs (3) will
illuminate while the vacuum is ON.
Return the battery to the charger immediately after use so
that it will be ready and fully charged for the next use.
Using an Accessory tool (Fig. G)
Your vacuum may come with some of the following tools.
2 in 1 Accesssory tool (10)
Crevice tool (11).
Pet hair tool (13).
Wide mouth dust brush (14).
either directly to the extension tube (6) or to the vacuum
inlet (5) as shown in Fig. G.
Align the top of the accessory tool (10), (11), (13) or (14)
with the vacuum inlet (16) or extension tube connection
(9a) and push into place so it locks into position as shown
14 Wide mouth dust brush
Extra filter
Beater Bar Pet
Additional battery
TBSV2020S TBSV2020GS
10 2 in 1 Accessory
11 Crevice tool
√
12 Accessory storage clip
√
√
√
√
√
√
√
√
√
√
√
√
13 Pet hair tool