background image

6

ENGLISH

(Original instructions)

Other batteries could burst, causing 

personal injury and damage.

u

Never attempt to charge non-

rechargeable batteries.

u

If the supply cord is damaged, it must

be replaced by the manufacturer or an

authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

u

Do not expose the charger to water.

u

Do not open the charger.

u

Do not probe the charger.

u

The appliance/battery must be

placed in a well ventilated area when

charging.

Electrical safety

Symbols on the charger

Read all of this manual carefully before using the 

appliance.

#

This tool is double insulated; therefore no earth wire 

is required. Always check that the power supply 

corresponds to the voltage on the rating plate.

$

 

The charger is intended for indoor use only.

Labels on appliance

The following symbols appear on this appliance along with the 

date code.

+

Read all of this manual carefully before 

using the appliance

SSC-150015

Only use with charger  

SSC-150015

Features

This tool includes some or all of the following features.

1. On/off power switch

2. Main body

3. Cleaning pad

4. Charging station

5. Extendable pole

 

(BHPC220 unit only)

6. Collar

 

(BHPC220 unit only)

7. Handle (BHPC220 unit only)

Charging (Fig. A - B)
Securing charging station to wall

u

Fit the charging station (4) to a suitable wall (preferably 

near a power outlet) using screws ( not provided) as 

shown in figure A.

u

The unit can then be stored, when not in use, or during the 

charging procedure as shown in figure B.

u

Whilst charging, the charging indicator light (8) will illumi-

nate.

u

When fully charged the charging indicator light (8) will go 

off.

Fitting cleaning pad (Fig. C)

u

Place the main body of the unit (2) onto a cleaning pad, 

ensuring that the ‘loop’ velcro surface located on the base 

(9) engages with the ‘hook’ velcro surface located on the 

cleaning pad (3), and press down firml .

Switching on and off (Fig. D)

u

To turn the speedy scrubber on, press the on/off power 

switch (1).

u

To turn the speedy scrubber off, press the on/off power 

switch (1) again. 

Fitting the collar BHPC220 unit only (Fig. E)

u

Place the collar (6) onto the main body (2) and press down 

firml , ensuring that the catch (10) clicks home securely. 

u

To remove the collar press the catch (10).

Fitting the extendable pole to the collar 

BHPC220 unit only (Fig. F)

u

Twist the Lock on the extendable pole (5) in the direction 

of the ‘unlock’ position.

u

Allow the extension (5a) to emerge from the extendable 

pole.

u

Slot the collar (6) into the extension (5a) until the button 

(6a) clicks into position.

u

Twist the lock on the extendable pole (5) in the direction of 

the ‘lock’ position.

Fitting handle to the extendable pole 

BHPC220 unit only (Fig. F)

u

Slot the handle (7) into the extendable pole (5) until the 

button (7a) clicks into position.

u

Adjust to desired height using the lock on the extendable 

pole as above.

Hints for optimum use

The appliance can be used with a variety of cleaning 

agents, including sprays, foams, rub-on gels and liquid 

detergents.

Отзывы: