background image

4

ENGLISH

(Original instructions)

5

ENGLISH

(Original instructions)

Intended use

Your BLACK+DECKER BDCSFL20 flashlight screwdriver 

has been designed for screwdriving applications. This tool is 

intended for consumer use only.

Safety instructions

General power tool safety warnings

@

Warning!

 

Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions listed below may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

 

The term "power tool" in all of the warnings listed below refers 

to your mains operated (corded) power tool or battery oper-

ated (cordless) power tool.

1.  Work area safety

a.  Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b.  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases 

or dust.

 Power tools create sparks which may ignite the 

dust or fumes.

c.  Keep children and bystanders away while operating a 

power tool.

 Distractions can cause you to lose control.

2.  Electrical safety

a.  Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs 

with earthed (grounded) power tools.

 Unmodified plugs 

and matching outlets will reduce risk of electric shock.

b.  Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators.

 There is an increased risk of electric shock 

if your body is earthed or grounded.

c.  Do not expose power tools to rain or wet conditions.

 

Water entering a power tool will increase the risk of 

electric shock.

d.  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts.

 Damaged or entangled cords increase the risk of 

electric shock.

e.  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

 Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

f.  If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply.

 Use of an RCD reduces the risk of 

electric shock.

3.  Personal safety

a.  Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a 

power tool while you are tired or under the influence 

of drugs, alcohol or medication.

 A moment of inattention 

while operating power tools may result in serious personal 

injury.

b.  Use personal protective equipment. Always wear eye 

protection.

 Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal 

injuries.

c.  Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source 

and/or battery pack, picking up or carrying the tool.

 

Carrying power tools with your finger on the switch or 

energising power tools that have the switch on invites 

accidents.

d.  Remove any adjusting key or wrench before turning 

the power tool on.

 A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

e.  Do not overreach. Keep proper footing and balance at 

all times.

 This enables better control of the power tool in 

unexpected situations.

f.  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves away 

from moving parts.

 Loose clothes, jewellery or long hair 

can be caught in moving parts.

g.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection can 

reduce dust-related hazards.

h.  Do not let familiarity gained from frequent use of tools 

allow you to become complacent and ignore tool 

safety principles. 

A careless action can cause severe 

injury within a fraction of a second.

4.  Power tool use and care

a.  Do not force the power tool. Use the correct power 

tool for your application.

 The correct power tool will do 

the job better and safer at the rate for which it was 

designed.

b.  Do not use the power tool if the switch does not turn it 

on and off.

  Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.

c.  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools.

 Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

d.  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool.

  

Power tools are dangerous in the hands of untrained 

users.

e.  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tools 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g.  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

h.  Keep handles and grasping surfaces dry, clean and 

free from oil and grease. 

Slippery handles and grasing 

surfaces do not allow for safe handling and control of the 

tool in unexpected situations.

5.  Battery tool use and care

a.  Recharge only with the charger specified by the 

manufacturer.

 A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

b.  Use power tools only with specifically designated 

battery packs.

 Use of any other battery packs may create 

a risk of injury and fire.

c.  When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, 

nails, screws, or other small metal objects, that can 

make a connection from one terminal to another.

 

Shorting the battery terminals together may cause burns 

or a fire.

d.  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help.

 Liquid ejected from the 

battery may cause irritation or burns.

e.  Do not use a battery pack or tool that is damaged or 

modified. 

Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or risk 

of injury.

f.  Do not expose a battery pack or tool to fire or 

excessive temperature. 

Exposure to fire or temperature 

above 265º F may cause explosion.

g.  Follow all charging instructions and do not charge the 

battery pack or tool outside the temperature range 

specified in the instructions. 

Charging improperly or at 

temperatures outside the specified range may damage the 

battery and increase the risk of fire.

6. Service

a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This will 

ensure that the safety of the power tool is maintained.

b.  Never service damaged battery packs. 

Service of 

battery packs should only be performed by the 

manufacturer or authorised service providers.

Additional power tool safety warnings 

@

Warning!

 Additional safety warnings for screw-

drivers and impact wrenches

u

 

Hold power tool by insulated gripping surfaces, when 

performing an operation where the fastener may 

contact hidden wiring.

 Fasteners contacting a "live" wire 

may make exposed metal parts of the power tool "live" 

and could give the operator an electric shock.

u

 

Use clamps or another practical way to secure and 

support the workpiece to a stable platform.

 Holding the 

work by hand or against your body leaves it unstable and 

may lead to loss of control.

u

  The intended use is described in this instruction manual. 

The use of any accessory or attachment or performance 

of any operation with this tool other than those 

recommended in this instruction manual may present a 

risk of personal injury and/or damage to property.

 

Safety of others

u

  Never allow children, persons with reduced physical, 

sensory or mental capabilities or lack of experience and 

knowledge or people unfamiliar with these instructions to 

use the machine, local regulations may restrict the age of 

the operator.

u

  Never operate the machine while people, especially 

children, or pets are nearby.

Additional power tool safety warnings 

@

Warning!

 Additional safety warnings for torches

u

  Never ttempt to remove or replace parts other than those 

specified in this manual.

u

  Do not operate without the lens in place or with a 

damaged lens.

u

  Never look directly into the light or shine the light into 

another persons eyes.

@

Warning! Fire hazard.

 Do not operate worklight 

or charger near flammable liquids or in gaseous 

or explosive atmospheres. Internal sparks may 

ignite fumes causing opersonal injury.

u

  Do not expose light or charger to wet or damp areas. Do 

not expose light or charger to rain or snow.

Отзывы: