10
Item
Description
Detail finger.
For small hard-to-reach areas. The detail finger can be
used for light sanding and for sanding into corners.
(Part Number - X32214-XJ)
240 grit sanding mesh.
For a fine finish for large detail sanding.
(Part Number - X39132-XJ)
120 grit sanding mesh.
For a medium finish for large detail sanding.
(Part Number - X39127-XJ)
80 grit sanding mesh.
For a coarse finish for large detail sanding.
(Part Number - X39122-XJ)
240 grit large detail sanding sheet with two
replacement tips.
For a fine finish for large detail sanding.
(Part Number - X31019-XJ)
120 grit large detail sanding sheet with two
replacement tips.
For a medium finish for large detail sanding.
(Part Number - X31009-XJ)
60 grit large detail sanding sheet with two
replacement tips.
For a coarse finish for large detail sanding.
(Part Number - X31039-XJ)
120 grit detailed finger sanding sheet.
For a medium finish for detailed sanding.
(Part Number - X3277-XJ)
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT:
To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or
other qualified service organizations, always using
identical replacement parts.
The RBRC
®
Seal
Th
e RBRC® (Rechargeable Battery
Recycling Corp oration) Seal on the
nickel cadmium, nickel metal hydride
or lithium-ionbatteries (or battery packs) indicates
that the costs to recycle these batteries (or battery
packs) at the end of their useful life have already been
paid by BLACK+DECKER. In some areas, it is illegal
to place spent nickel cadmium, nickel metal hydride
or lithium-ion batteries in the trash or municipal
solid waste stream and the Call 2 Recycle® program
provides an environmentally conscious alternative. Call
2 Recycle, Inc., in cooperation with BLACK+DECKER
and other battery users, has established the program in
the United States and Canada to facilitate the collection
of spent nickel cadmium, nickel metal hydride or
lithium-ion batteries. Help protect our environment and
conserve natural resources by returning the spent nickel
cadmium, nickel metal hydride or lithium-ion batteries
to an authorized BLACK+DECKER service center or to
your local retailer for recycling. You may also contact
your local recycling center for information on where
to drop off the spent battery. RBRC® is a registered
trademark of Call 2 Recycle, Inc. This Class B digital
apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. NOTE: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This
Class B digital apparatus complies with Canadian ICES-003.
SERVICE INFORMATION
All BLACK+DECKER Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable power
tool service. Whether you need technical
advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location
nearest you. To find your local service
location, call:
1-800-544-6986 or visit www.
blackanddecker.com
TWO-YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be
free from defects in material or workmanship for a period
of two (2) years following the date of purchase, provided
that the product is used in a home environment. This
limited warranty does not cover failures due to abuse,
accidental damage or when repairs have been made or
attempted by anyone other than Black+Decker and its
Authorized Service Centers. A defective product meeting
the warranty conditions set forth herein will be replaced
or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to
return the product to the retailer from whom it was
purchased (provided that the store is a participating
retailer).Returns should be made within the time period
of the retailer’s policy for exchanges. Proof of purchase
