Black+Decker BDCGG12U, Руководство пользователя

Страница: 8 / 16

8 9
ENGLISH
Troubleshooting
Problem Possible cause Possible solution
Appliance will
not start or heats
slowly
Battery not installed Check battery is properly
installed
Battery will not
charge
USB charger not
connected
Insert the USB charger,
connect to power source
USB charger not
connected to
power source
Connect USB charger to
power source
Refer to “Charging the
battery (fig. A)” for more
details
Surrounding air
temperature too
hot or too cold
Surrounding temperature
too hot or too cold
Move USB charger and
battery to a surrounding
air temperature of above
4.5 °C or below +40.5 °C
Appliance shuts off
abruptly
Battery has reached its
maximum thermal limit
Allow battery to cool
down
Out of charge Connect USB charger
to battery and power
source
Allow to charge (To
maximise the life of the
battery it is designed to
shut off abruptly when the
charge is depleted.
Hints for Optimum Use
The basic instructions given below are provided as a guide to
craft and DIY applications. The operator should practise the
various applications on scrap materials to obtain the required
effect and prevent damage to the work piece.
Tips on using your glue gun
‹ ‹
Choose the right glue stick for the appliance. Low
temperature glue sticks suitable for this appliance.
‹ ‹
Make sure that the surfaces are clean and free from dirt or
oily films before gluing.
‹ ‹
Assemble the part to confirm that they can be joined
together in the required position before applying glue.
‹ ‹
Make arrangements to hold the parts in position while the
glue hardens.
The heat from the glue may be conducted to the material.
Clamps or pliers should be used to protect the operator
from the heat.
‹ ‹
Working in a cold environment will reduce the time
required for the glue to harden.
Warm environments will increase the time for the glue to
set.
‹ ‹
The amount of glue applied will affect the hardening time.
Large heavy pools of glue will take up to fifty percent
longer to dry than small drops. Very thin beads will dry in
as few as 10 seconds. Some experimentation with your
glue gun on scrap material will help to determine the best
method to use for your particular project.
‹ ‹
Some paints and stains containing petroleum distillates
can weaken the adhesive. Test before using.
You may need to paint or stain before gluing.
‹ ‹
Excess glue is not easily removed from materials when it
has hardened. Removal of excess glue may be attempted
by scraping, peeling, or softening the glue by applying
heat e.g. with the hot tip of the appliance. Adhesive may
be removed from fabric by dry cleaning.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
‹ ‹
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
‹ ‹
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
‹ ‹
Regularly open the chuck and tap it to remove any dust
from the interior.
‹ ‹
Regularly clean the appliance using a damp cloth. Do not
use any abrasive or solvent-based cleaner. Never let any
liquid get inside the appliance and never immerse any part
of the appliance into liquid.
Protecting the environment.
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Service Information
Black+Decker offers a full network of company-owned
and authorized service locations throughtout Asia. All
Black+Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
Black+Decker location nearest to you.