Black+Decker BD61526, Инструкция по эксплуатации

Страница: 9 / 16

Page 9
SET UP & USE
OPERATING INSTRUCTIONS
STARTING YOUR NEW WINE CELLAR
After cleaning your wine cellar thoroughly. Wipe the outside with a soft
dry cloth and the interior with a clean moist cloth. Insert the power supply
cord into the socket. You will hear a beep. The LED display will indicate the
internal cabinet temperature.
NOTE: If the wine cellar has been placed in a horizontal or tilted position for
any period of time, wait 24 hours before plugging the unit in.
TEMPERATURE CONTROL
• Your wine cellar has an automatic control panel lock function. To
activate the temperature control functions, press this button first before
making a selection. It will lock automatically after the control panel has
not been touched for 30 seconds.
• Electronic touch controls are located on the front of the wine cellar.
You may choose a temperature setting within the range of 40° to
64° Fahrenheit by pressing the up arrow to raise the temperature
and by pressing the down arrow to lower the temperature. The set
temperature will indicate on the LED display and then revert back to the
actual temperature inside the cabinet.
• Press the control panel light button to turn on the LED light in the
interior of the wine cellar Press it again to turn it off. For maximum energy
efficiency, leave the light off when not viewing your wine collection. Note:
the light will not turn ON when the lock function is activated.
NOTE: Wait 3-5 minutes before restarting if you unplug the wine cellar. The unit
may fail to operate properly if restarted too quickly.
• Make sure wine bottles do not touch the back of the cabinet.
• Do not overload wine cellar.
F
55
˚
˚