Page 13
SET UP & USE
NOTE
: The pump operation light blinks every second when the
pump is failing to operate. Please turn off the unit and plug
the power cord out. Check the following things:
• Cleaning the filter of the pump. Remove the bucket from the unit,
take down the pump and clean the filter of the pump.
• Empty the water of the bucket.
• Reinstall the pump hose if it drops and reinstall the bucket
properly. Turn on the unit.
NOTE
: Do not use this operation when the outdoor temperature is equal to or
less than 32
˚
F (0
˚
C), otherwise the water will freeze and will cause the
water hose to be blocked and the unit will fail to operate. Make sure to
empty the bucket once a week when using the pump draining feature.
When the pump draining feature is not being used, remove the pump
drain hose from the outlet.
• Press the pump drain hose outlet in and take the pump drain hose out from it.
Make sure to not let the water in the pump hose drip to the floor.
Take the pump drain
hose out
Press the pump drain
hose outlet in
Содержание BD22MWSA
