FEATURES
1. Cutting blade (moving)
2. Hook (fixed)
3. Cutting trigger
4. On/Off Switch
5. Charging slot
6. Battery charge indicator
7. Cutting indicator
8. Battery charger (not shown)
9. Blade cover (not shown)
Safety Warnings and Instructions - Batteries
• Do not disassemble or open, drop (mechanical abuse), crush, bend or
deform, puncture, or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, or expose to fire,
excessive heat including soldering irons, or put in microwave oven.
• Only use the battery with a charging system specified by the manufacturer/
supplier.
• Do not short-circuit a battery or allow metallic or conductive objects to
contact both battery terminals simultaneously.
5
• Dispose of used batteries promptly according to the manufacturer/
supplier’s instructions.
• Improper battery use may result in a fire, explosion, or other hazard.
• Battery usage by children should be supervised.
WARNING
:
Never attempt to open the battery for any reason.
If battery case is cracked or damaged, do not insert into charger. Do not crush,
drop or damage battery. Do not use a battery or charger that has received a sharp
blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit
with a hammer, stepped on). Damaged batteries should be returned to service
center for recycling.
Safety Warnings and Instructions - Charging
1. This manual contains important safety and operating instructions.
2. Before using battery charger, read all instructions and cautionary
warnings on battery charger and product using battery.
CAUTION
:
To reduce the risk of injury, use charger only
with this product. Batteries in other products may burst causing personal
injury or damage.
3. Do not expose charger to rain or snow.
4. Use of an attachment not recommended or sold by BLACK+DECKER may
result in a risk of fire, electric shock, or injury to persons.
5. To reduce risk of damage to electric plug and cord, pull by plug rather
than cord when disconnecting charger.
6. Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
7. An extension cord should not be used unless absolutely necessary. Use
of improper extension cord could result in a risk of fire, electric shock or
electrocution.
a. Two-wire cords can be used with 2-wire or 3-wire extension cords. Only
round jacketed extension cords should be used, and we recommend that
they be listed by Underwriters Laboratories (U.L.). If the extension is to be
used outside, the cord must be suitable for outdoor use. Any cord marked
for outdoor use can also be used for indoor work. The letters “W” or “WA”
on the cord jacket indicate that the cord is suitable for outdoor use.
8. Use only the supplied charger when charging your tool. The use of any other
charger could damage the tool or create a hazardous condition.
9. Use only one charger when charging.
10. Do not attempt to open the charger. There are no customer serviceable parts
Minimum Gage for Cord Sets
Volts
Total Length of Cord in Feet
120V
0-25
26-50
51-100
101-150
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V
0-50
51-100
101-200
201-300
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More
Not more
American Wire Gage
Than Than
0 - 6
18
16
16
14
6 - 10
18
16
14
12
10 - 12
16
16
14
12
12 - 16
14
12
Not Recommended
1
2
3
4
5
6
7
1
Содержание BD1168PDQ
Страница 10: ...10...
