Black+Decker BCRTA01, Оригинальное руководство пользователя

Страница: 5 / 24

5
ENGLISH (Original instructions)
Labels on tool
The following pictograms along with the date code are shown
on the tool:
:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
Do not stare at operating lamp
Additional safety instructions for batteries and
chargers
Batteries
u
Never attempt to open for any reason.
u
Do not expose the battery to water.
u
Do not store in locations where the temperature may
exceed 40 °C.
u
Charge only at ambient temperatures between 10 °C and
40 °C.
u
When disposing of batteries, follow the instructions given
in the section "Protecting the environment".
Do not attempt to charge damaged batteries.
Features
This tool includes some or all of the following features:
1. On/off switch
2. Forward/reverse slider
3. Bit holder chuck
4. Collar/LED work light
5. Hex key
6. Charging port
7. USB connector
Charging the battery (fig. A)
u
Insert the USB connector (7a) into the charging port (6).
u
Plug the USB connector (7b) into a USB power supply
(not included).
u
Leave the tool connected to the charger for up to 4 hours.
u
The charging indicator (6a) will illuminate during charging.
u
Once fully charged the charging indicator (6a) will go out.
Fitting and removing a Hex key (fig. B, C)
Warning! Make sure the forward reverse slider (2) is in the
locked off position (central position).
u
Turn the collar (4) anti-clockwise to open the bit holder
chuck (3).
u
insert the hex key (5) into the bit holder chuck (3) until it
comes into contact with the magnetic disc (3a) at the end
of the channel, making sure it is central to the chuck body.
u
Tighten the collar (4) clockwise until the hex key (5) is
secure.
u
A clip on extension collar (3b) is provided to facillitate
larger hex keys. Fit as illustrated in figure C.
Warning! Use only with the short end of the hex key sitting in
the slot. Injury may occur if the hex key overhangs the collar
LED work light (fig. D)
The LED work light (4) is activated automatically when the on/
off switch (1) is depressed. The LED will also illuminate when
the trigger is depressed and the forward/reverse slider (2) is in
the locked off position (central position).
Selecting the direction of rotation (fig. E)
For drilling and for tightening hex bolts, use forward rotation.
For loosening hex bolts, use reverse rotation.
u
To select forward rotation, push the forward/reverse slider
(2) to the right position.
u
To select reverse rotation, push the forward/reverse slider
(2) to the left position.
u
To lock the tool, set the forward/reverse slider into the
centre position.
Fastening
u
Select forward or reverse rotation using the forward/
reverse slider (2).
u
To switch the tool on, press the on/off switch (1).
u
To switch the tool off, release the on/off switch (1).
Hints for optimum use
Screwdriving
u
Always use the correct type and size of hex key.
u
If hex bolts are difficult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.
u
Always hold the tool and hex key in a straight line with the
hex bolt.
Note: This unit can also accept standard hex screwdriver bits.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any cleaning or maintenance on
the tool, unplug from the charger.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.