Page 15
SET UP & USE
1. To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, being careful not to overfill.
3. Replace the cap by inserting it aligned with “open” arrow and turning it to the
closed (right) arrow.
NOTE:
Clean up any rinse aid split during filling with an absorbent cloth to avoid
excessive foaming during the next wash. Don’t forget to replace the cap
before you close dishwasher door.
ADJUSTING RINSE AID DISPENSER
The rinse aid dispenser has four settings. The recommended setting is on “3”. If the
dishes still are not drying properly or are spotted, adjust the dial to the next higher
number on “4”.
NOTE:
Increase the dose if there are drops of water or lime spots on the dishes after
washing. Reduce it if there are sticky whitish stains on your dishes or a bluish
film on glassware or knife blades.
DETERGENT DISPENSER
The dispenser must be refilled before the start of each wash cycle following the
instructions provided in the Wash Cycle Table . Your dishwasher uses less detergent
and rinse aid then conventional dishwasher. Generally, only one tablespoon of
detergent is needed for a normal wash load. Also, more heavily soiled items need
more detergent. Always add the detergent just before starting the dishwasher,
otherwise it could get damp and will not dissolve properly.
Содержание BCD6W
Страница 2: ...Page 2 ...
Страница 31: ...Page 31 ...