manualshive.com logo in svg

Black Bruin BB 4, Руководство по эксплуатации продукта

Поделиться
Скачать
Black Bruin BB 4 Скачать руководство пользователя страница 31

Seal protector and grease nipples

The seal protector is a standard feature in the BBC series motors (excluding the

double brake motors). The seal protector is also known as a grease ring.
The seal protector prevents dirt and moisture from entering to the motor shaft seal.

The operation of the seal protector is based on a sealing lubricant pocket.

Figure 24. BBC motor's seal protector and grease nipples.

Brakes

There is a variety of brakes available for Black Bruin motors. Brakes, like motors, are

designed in compact, powerful packages and tailored to meet the customer specific

requirements in various applications.

Static wet multi-disc brake for BBC and BB series motors

The spring applied, pressure to release, wet multi-disc brake is a parking brake, but it

can be used dynamically as an emergency brake.
For the minimum brake release pressure, refer to 

Technical data BB series

 on page 10

and 

Technical data BBC series

 on page 12. The brake operating pressure in BBC (low

pressure brake) can not be higher than 30 bar. Depending on the Black Bruin frame

size, the brake may have internal leakage (max. 0.6 l/min with oil viscosity of 35 cSt),

which has to be considered in the brake circuit design. In BBC motors the brake can

be manually released for emergency towing.
Standard, high pressure, BB brakes are equipped with static seals and do not have

internal leakage. Note that EP, HD and some anti-wear additives in oil can cause

remarkable reduction in brake torque.

3.11

3.12

3.12.1

Motor Description

Product Manual

31

Содержание BB 4







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды