background image















14













®

Making cascade connections

The Wizard AVU series of products have been specifically designed to be flexible 
in order to support both your immediate and future needs for media streaming. 
In addition to the standard connections made from transmitters to receivers, 
you can also link extra transmitters to transmitters and/or receivers to receivers 
in order to provide more display/speaker outputs. These non-standard links are 
called 

cascade connections

Important limitations when cascading

•  There should never be more than three cascade connections between the 

primary transmitter

 (the one connected to the source PC) and any receiver. 

The cascade connections can all occur at the transmitter end or all at the 
receiver end (AVU5111A modules only) or at a mixture of both.

•  Each cascade connection reduces the overall link length permissible from a 

transmitter to the final receiver in a branch. To calculate the recommended 
overall maximum link length for a branch, count the number of cascade 
connections between the primary transmitter and the final receiver in that 
branch. The effects of cascade connections on overall branch link lengths are 
as follows:

Number of cascade connections 

Overall length of links for a branch

(in a branch) 

(from transmitter to furthest receiver)

300m (1000 feet)

250m (800 feet)

200m (650 feet)

175m (600 feet)

Notes

   The lengths of transmitter cascade (video) connections should never be 

longer than 2m (6 feet) and can be considered to have a negligible effect 
upon overall link lengths.

   The maximum resolutions achievable are: 1600 x 1200 x 60Hz at 650ft and 

1280 x 1024 x 60Hz at 1000ft. If you are using lower resolutions then it 
may be possible to achieve longer transmission distances than shown in the 
above table although we do not recommend runs longer than 1000 feet 
(300 metres) in any installation. If you are running shorter cables then it may 
be possible to use more cascades than shown in the above table.

Cascade connection examples

These examples demonstrate valid configurations and the effect of cascade 
connections upon overall link lengths:  

Содержание Wizard AVU5001A



























Отзывы: