Black Box VX1000 Series, Руководство пользователя, Страница: 17 / 24

877-877-2269 | blackbox.com Page 17
Chapter 5: Hardware Installation
5. Hardware Installation
1. Connect an HDMI or VGA input source (such as Blu-ray
™
) to the VX-1002-TX
transmitter.
NOTE: Be careful when connecting cables—do not force the cable ends into the
connectors.
2. Connect a good quality, well-terminal CAT5e/6 cable of no more than
230 feet (70 m) for 4K or 328 feet (100 m) for 1080p from the HDBaseT OUT
port of the Transmitter to HDBaseT IN Input of the HDBaseT receiver.
NOTE: 230 feet (70 m) @ 4K or 328 feet (100 m) @ 1080p video are maximum
recommended transmission distances for this model and denote perfect
transmission conditions—including straight cable runs with no electrical
interference, bends, kinks, patch panels, or wall outlets.
If either of the above is a factor in your installation, transmission range may be
affected—avoid where possible.
3. Connect an HDMI display device (LED/LCD display or projector) to the HDMI
OUT port on the HDBaseT receiver.
4. Connect the IR emitter cable to the IR OUT port of the VX-1002-TX, connect
the IR receiver cable to the IR RX port of the receiver, and connect the IR
emitter to the IR TX port of the receiver.
5. Power on the HDBaseT receiver. If the HDBaseT receiver doesn't support the
PSE function, connect a 12 V power supply to the VX-1002-TX transmitter.
Document camera
Ethernet switch
VGA IN
HDMI IN
Ethernet
PC
USB
HDBaseT
HDBaseT receiver
HDMI USB USB
Monitor
Keyboard and mouse
Figure 5-1. Typical application.